Powder coating for external fire-protection pipe and component surfaces, with red and other specified colors, line-matched application behavior, and project-defined corrosion testing. System listings and potable-water approvals must be verified separately for the exact component and formulation.
Powder coating for external fire-protection pipe and component surfaces, with red and other specified colors, line-matched application behavior, and project-defined corrosion testing. System listings and potable-water approvals must be verified separately for the exact component and formulation.
Formato, custo, envio e prazo são confirmados após a análise do seu projeto B2B.
Use these manufacturer TDS documents as a starting point for chemistry, finish, cure and test review. Confirm the exact formulation, revision and project acceptance criteria before approval or bulk ordering.
Primers & Coating Systems · 3 pages
Primers & Coating Systems · 3 pages
DAMEI fire-protection pipe powder coating is developed for the external coating of steel pipe and related metal components where buyers need a controlled red or specified color, consistent line application, adhesion, and a corrosion-protection system matched to the installation environment.
Typical projects include sprinkler pipe exteriors, pipe accessories, supports, and visible fire-service components. The formulation and process should be selected using the substrate, pretreatment, part geometry, line speed, film target, cure limits, storage, transport, and final environment.
RAL 3000 and other red references are often used for identification, but a red finish does not make a pipe, coating, or assembled system compliant with a fire code or product listing. Any regulatory, system-listing, or potable-water claim must be supported by current documentation that applies to the exact component, product, jurisdiction, and use condition. DAMEI does not present this general product family as universally listed or approved.
Pipe lines need stable grounding, consistent rotation or gun movement, controlled powder delivery, and verified metal temperature. The trial should measure film thickness around the circumference and at welds, ends, and supports. Check color, gloss, cure, adhesion, and damage after handling. If reclaimed powder is used, confirm that the chosen ratio does not shift color or performance.
Corrosion resistance depends on the entire system. Surface contamination, inadequate pretreatment, thin edges, under-cure, and transport damage can cause failure even when the powder itself is suitable. Approve representative coated pipe using the buyer's named method.
Before an order, ask for the available technical data sheet, safety data sheet, approved color panel, sample results, and batch documents for the selected formulation. If a listing or regulatory certificate is mandatory, send the exact requirement and verify the returned document independently.
Company-level ISO management certificates can be reviewed on the About DAMEI page. They do not create an automatic fire-system or potable-water approval for a coating.
Use the technical sales form to send pipe dimensions, substrate, pretreatment, color, annual volume, line parameters, environment, and test specification. This allows DAMEI to prepare a relevant sample and trial plan.
No. Color alone cannot establish compliance. The applicable component and assembled system must be evaluated against the relevant requirements.
Do not assume so. Internal contact requires separate formulation, process, and applicable approval review.
Cleaning, weld preparation, pretreatment, formulation, electrostatic setup, film build, and cure all matter. Inspect these areas on production-representative samples.
Yes, subject to a physical or recognized color reference and approval under agreed lighting and finish conditions.
Provide the test standard, substrate, pretreatment, scribe method, duration, and pass/fail rating rather than only an hour target.
Descubra mais soluções de pintura a pó.
Revestimento em pó híbrido de epóxi‑poliéster para produtos metálicos internos que exigem um acabamento liso, adesão confiável e um equilíbrio prático entre estética e desempenho mecânico. As características de cor, brilho, textura, faixa de cura e configurações de linha são validadas por meio de amostras e testes de produção.
Revestimento em pó de poliéster puro, desenvolvido para produtos metálicos destinados a ambientes externos, onde a resistência às intempéries, a retenção de cor e a durabilidade do sistema contra a corrosão são essenciais. O grau de durabilidade específico, o acabamento, o pré-tratamento, a espessura da película e o perfil de cura são selecionados e validados de acordo com as exigências do projeto.
Revestimentos em pó metálicos decorativos e com efeitos especiais para produtos metálicos que exigem controle preciso de cor, brilho, textura ou profundidade visual. Amostras e testes de linha definem a aparência aprovada, pois o equipamento, o sistema de recuperação, a espessura do filme e o ângulo de visão podem alterar o resultado.
