Powder coating for external fire-protection pipe and component surfaces, with red and other specified colors, line-matched application behavior, and project-defined corrosion testing. System listings and potable-water approvals must be verified separately for the exact component and formulation.
Powder coating for external fire-protection pipe and component surfaces, with red and other specified colors, line-matched application behavior, and project-defined corrosion testing. System listings and potable-water approvals must be verified separately for the exact component and formulation.
Format, coût, expédition et délai sont confirmés après examen de votre projet B2B.
Use these manufacturer TDS documents as a starting point for chemistry, finish, cure and test review. Confirm the exact formulation, revision and project acceptance criteria before approval or bulk ordering.
Primers & Coating Systems · 3 pages
Primers & Coating Systems · 3 pages
DAMEI fire-protection pipe powder coating is developed for the external coating of steel pipe and related metal components where buyers need a controlled red or specified color, consistent line application, adhesion, and a corrosion-protection system matched to the installation environment.
Typical projects include sprinkler pipe exteriors, pipe accessories, supports, and visible fire-service components. The formulation and process should be selected using the substrate, pretreatment, part geometry, line speed, film target, cure limits, storage, transport, and final environment.
RAL 3000 and other red references are often used for identification, but a red finish does not make a pipe, coating, or assembled system compliant with a fire code or product listing. Any regulatory, system-listing, or potable-water claim must be supported by current documentation that applies to the exact component, product, jurisdiction, and use condition. DAMEI does not present this general product family as universally listed or approved.
Pipe lines need stable grounding, consistent rotation or gun movement, controlled powder delivery, and verified metal temperature. The trial should measure film thickness around the circumference and at welds, ends, and supports. Check color, gloss, cure, adhesion, and damage after handling. If reclaimed powder is used, confirm that the chosen ratio does not shift color or performance.
Corrosion resistance depends on the entire system. Surface contamination, inadequate pretreatment, thin edges, under-cure, and transport damage can cause failure even when the powder itself is suitable. Approve representative coated pipe using the buyer's named method.
Before an order, ask for the available technical data sheet, safety data sheet, approved color panel, sample results, and batch documents for the selected formulation. If a listing or regulatory certificate is mandatory, send the exact requirement and verify the returned document independently.
Company-level ISO management certificates can be reviewed on the About DAMEI page. They do not create an automatic fire-system or potable-water approval for a coating.
Use the technical sales form to send pipe dimensions, substrate, pretreatment, color, annual volume, line parameters, environment, and test specification. This allows DAMEI to prepare a relevant sample and trial plan.
No. Color alone cannot establish compliance. The applicable component and assembled system must be evaluated against the relevant requirements.
Do not assume so. Internal contact requires separate formulation, process, and applicable approval review.
Cleaning, weld preparation, pretreatment, formulation, electrostatic setup, film build, and cure all matter. Inspect these areas on production-representative samples.
Yes, subject to a physical or recognized color reference and approval under agreed lighting and finish conditions.
Provide the test standard, substrate, pretreatment, scribe method, duration, and pass/fail rating rather than only an hour target.
Découvrez davantage de solutions de peinture en poudre.
Revêtement en poudre polyester spécialement développé pour les ossatures de maisons conteneurs, les panneaux et les composants métalliques fabriqués. Les formulations et les essais en ligne mettent l’accent sur la couverture des pièces de grande taille, la régularité des teintes, la résistance aux intempéries, le comportement au transfert, le prétraitement, l’épaisseur du film ainsi que l’efficacité de la cuisson.
Revêtement en poudre hybride époxy‑polyester destiné aux produits métalliques d’intérieur nécessitant une finition lisse, une adhésion fiable ainsi qu’un équilibre optimal entre esthétique et performances mécaniques. Les paramètres de couleur, de brillance, de texture, de plage de cuisson et de réglage de la ligne sont validés au moyen d’échantillons et d’essais de production.
Revêtement en poudre pur polyester, spécialement conçu pour les produits métalliques d’extérieur où la résistance aux intempéries, la tenue des couleurs et la durabilité du système anti-corrosion sont primordiaux. Le grade de durabilité, le fini, le prétraitement, l’épaisseur de film ainsi que le profil de cuisson sont sélectionnés et validés en fonction du projet.
